Where are the applications of DB9? The DB9 connector and DB9 cable are mainly used for communication, network, and video. The specific contents are as follows: 1. Communication interface/connection One of the most widespread uses of D-sub is for RS-232 serial communication. Although this standard is not currently mandated, it has been accepted by the industry. The RS-232 devic...
What is OBD Connector? On-board diagnostics (OBD) refers to automotive electronic systems that provide maintenance technicians with the ability to diagnose and report on the vehicle itself. OBD enables technicians to access subsystem information for performance monitoring and analysis of maintenance requirements. OBD is the standard protocol used by most light duty vehicles to retrieve...
What is Lvds? Low voltage differential signal (LVDS), also known as TIA / eia-644, is a technical standard that specifies the electrical characteristics of the differential serial signal standard. LVDS uses cheap twisted pair copper wires to operate at low power and can operate at very high speed. LVDS is only a physical layer specification; Many data communication standards and applications use i...
IDC cable assembly "The insulation displacement contact (IDC), also known as the insulation penetration contact (IPC), is an electrical connector designed to connect the conductors of insulated cables. Through the connection process, one or more blades that are selectively sharpened are forced to pass through the insulation without peeling off the insulation conductor before connection. When it is...
What is a DB9 connector? The term "DB9" refers to a common connector type, one of the D-subminiature or D-sub types. The DB9's D-Subminiature connector will have the smallest "footprint," with nine pins (for male connectors) or nine holes (for female connectors). Where is the DB9 connector used? DB9 connectors were once common on PCS and servers. The DB9 connector is designed to comp...
RJ45 is a type of information socket (communication outlet) connector in a wiring system. The connector consists of a plug (connector, crystal head) and a socket (module). The plug has 8 grooves and 8 contacts. RJ is short for Registered Jack, which means "Registered socket". In the FCC (Federal Communications Commission Standards and Regulations), RJ describes the interface of a public telecommun...
What is AVSS wire? The full name of AVSS wire is AVSS-thin-wall low-voltage polyvinyl chloride PVC wire. As we all know, AVSS wires are generally used in automotive wiring harnesses. By thin wall, we mean the thickness and material of the insulation layer. At present, thin-wall automotive wire AV, AVS, and AVSS, they are special PVC material is made of stabilizer, PVC resin, plasticizer, lubr...
About Solar Panel Wire Cables Solar wire sizes are standardized using American wire gauges and are constructed of copper wire and insulation. In general, higher specification numbers can safely handle lower currents. At the same time, the larger the conductor of the wire, the more current will flow through it. As a result, different solar systems require different wire sizes. In addition, d...
Copper foil soft connection: The copper foil braided busbar expansion joint is made of oxygen-free copper tube, which is flat and bright. Copper foil flexible connection products are widely used in electric vehicles, high and low voltage electrical appliances, vacuum electronics, high and low voltage switch cabinets, electric welding machines, automobiles, electric locomotives, electric furnaces, ...
once you subscribe our newsletter. we will keep you posted the latest catalog,Also will inform you the trendy news for the electronics and wire harness.