Blog - Technology and Technique of Cable,Connector,Wire harness and Solar Energy Products

What is OBD Cable assembly? Sep 14, 2022
What is OBD Connector? On-board diagnostics (OBD) refers to automotive electronic systems that provide maintenance technicians with the ability to diagnose and report on the vehicle itself. OBD enables technicians to access subsystem information for performance monitoring and analysis of maintenance requirements. OBD is the standard protocol used by most light duty vehicles to retrieve...
- OBD Cable
- OBDII Connector
- Obd2 Cable Extension cable
What is Lvds Contact/Cable Assembly? Aug 27, 2022
What is Lvds? Low voltage differential signal (LVDS), also known as TIA / eia-644, is a technical standard that specifies the electrical characteristics of the differential serial signal standard. LVDS uses cheap twisted pair copper wires to operate at low power and can operate at very high speed. LVDS is only a physical layer specification; Many data communication standards and applications use i...
- lvds cable assembly
- Lvds
- custom lvds cable
What is IDC Flat Cable Assembly? Aug 27, 2022
IDC cable assembly "The insulation displacement contact (IDC), also known as the insulation penetration contact (IPC), is an electrical connector designed to connect the conductors of insulated cables. Through the connection process, one or more blades that are selectively sharpened are forced to pass through the insulation without peeling off the insulation conductor before connection. When it is...
- IDC Flat Cable Assembly
- IDC connector
- IDC Flat Ribbon Cable
What is the DB9 Connector? Aug 26, 2022
What is a DB9 connector? The term "DB9" refers to a common connector type, one of the D-subminiature or D-sub types. The DB9's D-Subminiature connector will have the smallest "footprint," with nine pins (for male connectors) or nine holes (for female connectors). Where is the DB9 connector used? DB9 connectors were once common on PCS and servers. The DB9 connector is designed to comp...
- db9 connector
- db9 cable assembly
- db9 male female connector
What is RJ45 Connector? Aug 26, 2022
RJ45 is a type of information socket (communication outlet) connector in a wiring system. The connector consists of a plug (connector, crystal head) and a socket (module). The plug has 8 grooves and 8 contacts. RJ is short for Registered Jack, which means "Registered socket". In the FCC (Federal Communications Commission Standards and Regulations), RJ describes the interface of a public telecommun...
- rj45 connector
- RJ45
- network connector
What is AVSS Wire? Aug 18, 2022
What is AVSS wire? The full name of AVSS wire is AVSS-thin-wall low-voltage polyvinyl chloride PVC wire. As we all know, AVSS wires are generally used in automotive wiring harnesses. By thin wall, we mean the thickness and material of the insulation layer. At present, thin-wall automotive wire AV, AVS, and AVSS, they are special PVC material is made of stabilizer, PVC resin, plasticizer, lubr...
- AVSS Wire Cable
- AVSS Wire
- Auto Wire Cable
What cable for solar panel?--solar cable Aug 16, 2022
About Solar Panel Wire Cables Solar wire sizes are standardized using American wire gauges and are constructed of copper wire and insulation. In general, higher specification numbers can safely handle lower currents. At the same time, the larger the conductor of the wire, the more current will flow through it. As a result, different solar systems require different wire sizes. In addition, d...
- solar cable
- solar wire
- solar panel cable
What is the advantages of copper foil soft connection? Aug 12, 2022
Copper foil soft connection: The copper foil braided busbar expansion joint is made of oxygen-free copper tube, which is flat and bright. Copper foil flexible connection products are widely used in electric vehicles, high and low voltage electrical appliances, vacuum electronics, high and low voltage switch cabinets, electric welding machines, automobiles, electric locomotives, electric furnaces, ...
- copper foil soft connection
- copper busbar
- copper soft connection
What is MC4 Solar Connector? Aug 04, 2022
MC4 connector is a single contact electrical connector. They are usually used to connect solar wires to solar panels. MC4 stands for "multi contact, 4 mm". It is the standard of renewable energy industry. MC4 connector can easily build panel strings. In today's solar market, MC4 connectors and their compatible products are widely used. In most cases, larger solar panels are already equipped with M...

1 ... 14 15 16 17 18

A total of 18 pages

Categories

Blog

New Blog

Tags